Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • YG CRUZE
  • SECTION 3B - MANUAL RACK AND PINION
    • 1. GENERAL DESCRIPTION
    • 2. DIAGNOSIS
      • 2.1 DIAGNOSIS TABLE
      • 2.2 STEERING RACK BOOT CHECK
      • 2.3 TIE ROD END BOOTS CHECK
      • 2.4 STEERING SHAFT JOINT CHECK
      • 2.5 TiE ROD END CHECK
      • 2.6 STEERING WHEEL CHECK
    • 3. ON-VEHICLE SERVICE
      • 3.1 LUBRICATION
      • 3.2 TIE ROD END
        • REMOVAL
        • INSTALLATION
      • 3.3 MANUAL RACK AND PINION ASSEMBLY (STEERING GEAR CASE)
        • REMOVAL
        • INSTALLATION
      • 3.4 RACK BOOT/TIE ROD
        • REMOVAL
        • INSTALLATION
      • 3.5 STEERING RACK PLUNGER
        • REMOVAL
        • INSPECTION
        • INSTALLATION
      • 3.6 STEERING PINION
        • REMOVAL
        • INSPECTION
        • INSTALLATION
      • 3.7 STEERING RACK
        • REMOVAL
        • INSPECTION
        • INSTALLATION
      • 3.8 PINION BEARING
        • REMOVAL
        • INSTALLATION
    • 4. REQUIRED SERVICE MATERIAL
    • 5. SPECIAL TOOLS
Made by Mibble ♥